Skip to main content
Publications | Persons | Institutes | Projects
[ report an error in this record ]basket (0): add | show Print this page

Hydraulic study of breaking logs in lock filling with gate openings: Sub report 2. CFD modeling of scale model experiments
Breugem, W.A.; Decrop, B.; Rauwoens, P.; Van Hoydonck, W.; Verelst, K.; Peeters, P.; Mostaert, F. (2016). Hydraulic study of breaking logs in lock filling with gate openings: Sub report 2. CFD modeling of scale model experiments. version 6.0. WL Rapporten, 14_050. Waterbouwkundig Laboratorium: Antwerp. VI, 53 + 14 p. appendices pp.
Part of: WL Rapporten. Waterbouwkundig Laboratorium: Antwerpen. , more

Available in  Authors 
Document type: Project report

Keywords
    Filling
    Hydraulic structures > Locks > Filling and emptying system
    Locks (Waterways)
    Numerical modelling
Author keywords
    Gate openings; Breaking logs; CFD modelling

Authors  Top 
  • Breugem, W.A.
  • Decrop, B., more
  • Rauwoens, P., more
  • Van Hoydonck, W., more

Abstract
    Locks are key structures for the accessibility of ports and navigable waterways. The filling of the lock chamber has to be done with special precautions, taking into account the forces experienced by the moored vessels during the levelling process. In case of filling through lock gate openings, one of the potential methods to minimize the hydrodynamic forces on the ships, is to insert breaking logs at the downstream side of the gate openings, aiming at an enhanced spreading and energy dissipation of the filling jets.

    In order to investigate the influence of the breaking log configuration on the induced flow patterns and their role in the energy dissipation of a turbulent filling jet, Flanders Hydraulics Research has defined a project in which both physical model research (phase 1) and Computational Fluid Dynamics (phase 2) are applied. This report pertains to phase 2 of the project and concerns the CFD modelling of schematic lock basin with and without breaking logs using the OpenFOAM CFD package.

    The results of the CFD model are compared with data from the physical model experiments of phase 1 on the one hand and with data from literature on the other hand. A sensitivity analysis has been performed to studying study the influence of the grid resolution and the influence of different turbulence models on the solution. The model is shown to give good results. However, some differences between the results of the CFD simulations and the physical model experiments are noticed. The data from the CFD model are used to study the influence of breaking logs on the flow patterns in the lock gate during the filling of a lock.


All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors