Skip to main content
Publications | Persons | Institutes | Projects
[ report an error in this record ]basket (1): add | show Print this page

one publication added to basket [242483]
Resistance of concrete with blast-furnace slag against chlorides, investigated by comparing chloride profiles after migration and diffusion
Maes, M.; Gruyaert, E.; De Belie, N. (2013). Resistance of concrete with blast-furnace slag against chlorides, investigated by comparing chloride profiles after migration and diffusion. Mater. Struct. 46(1-2): 89-103. http://dx.doi.org/10.1617/s11527-012-9885-3
In: Materials and Structures. Springer: Dordrecht. ISSN 1359-5997; e-ISSN 1871-6873, more
Peer reviewed article  

Available in  Authors 

Author keywords
    Concrete; Blast-furnace slag; Chlorides; Migration; Diffusion; Chloride profiles

Authors  Top 

Abstract
    The effect of partial replacement of ordinary Portland cement (OPC) by blast-furnace slag (BFS) on concrete’s resistance to chlorides was examined by comparing chloride profiles and colour change boundaries after non-steady state migration and natural diffusion tests, cfr. NT Build 492 and NT Build 443, respectively. Chloride profiles were obtained by means of potentiometric titration and the colour change boundaries by spraying 0.1 M AgNO3-solution. One OPC mixture and three BFS mixtures, with cement replacement levels of 50, 70 and 85 %, were tested. It was found that, compared to OPC concrete, migration coefficients of 50 and 70 % BFS concrete are decreased with 32 and 57 %, respectively. Diffusion coefficients are reduced by 66 and 50 %, respectively. Nevertheless, the chloride binding capacity of BFS concrete, determined from the difference between total and free chlorides, was lower than for OPC concrete. The results for 85 % BFS concrete differ from the results for 50 and 70 % BFS concrete, since higher migration and diffusion coefficients are found. Besides, free chloride concentrations at the colour change boundary (ccb), obtained after spraying with AgNO3-solution, amounted to 0.30 mol/l on average. There was no clear relation between the free chloride content at ccb and the BFS content.

All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors