Squat formula for cape-size bulk carriers based on towing tank results and full-scale measurements
Verwilligen, J.; Mansuy, M.; Vantorre, M.; Eloot, K. (2018). Squat formula for cape-size bulk carriers based on towing tank results and full-scale measurements, in: MARSIM 2018, Halifax, Canada, 12 - 16 August 2018. pp. [1-17]
In: (2018). MARSIM 2018, International Conference on Marine Simulation and Modelling, Halifax, Canada, 12 - 16 August 2018. IMSF: [s.l.]. 55 pp., meer
|
| Beschikbaar in | Auteurs |
|
Documenttype: Congresbijdrage
|
| Author keywords |
Squat; Towing Tank; Full-Scale Measurements; Bulk Carrier |
| Abstract |
On behalf of the Common Nautical Authority, Flanders Hydraulics Research and Ghent University analysed the squat behaviour of cape-size bulk carriers based on both full-scale measurement and towing tank results.
The full-scale measurements focused on seven inbound cape-size bulk carriers (drafted approximately 16.5 m) to the port of Flushing/Vlissingen (NL). The voyages of this type of vessels corresponded with small under keel clearances (to a minimal value of 16%) and exposed wave conditions (with a wave height up to 2.6 m). By filtering steady and unsteady motions the motions related to squat and seakeeping were split.
Furthermore, Flanders Hydraulics Research performed a comprehensive test program in the towing tank for manoeuvres in confined water, with a scale model (at scale 1/75) very similar to the ships tested at full-scale. This test program provides squat data at different ship speeds and propeller rates and for four under keel clearances varying between 10% and 100% of the ship’s draft.
Based on the squat measurements in the towing tank a squat formula was developed. This formula was applied on the conditions present during the full-scale measurements in order to compare the squat behaviour to the towing tank results and between the different vessels tested at full-scale. |
|
