Overslaan en naar de inhoud gaan
Publicaties | Personen | Instituten | Projecten
[ meld een fout in dit record ]mandje (0): toevoegen | toon Print deze pagina

Influence of accelerated corrosion on bi-material steel-CFRP double-lap joints bonded with thick adhesive
Jaiswal, P.R.; Kumar, R.I.; Rooms, K.; Rousseau, J.; Pondicherry, K.; De Waele, W. (2023). Influence of accelerated corrosion on bi-material steel-CFRP double-lap joints bonded with thick adhesive. Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering 237(1): 38-51. https://dx.doi.org/10.1177/09544089221105850
In: Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering. SAGE PUBLICATIONS LTD: London. ISSN 0954-4089; e-ISSN 2041-3009, meer
Peer reviewed article  

Beschikbaar in  Auteurs 

Trefwoord
    Marien/Kust
Author keywords
    Bi-material; adhesive joints; electrochemical corrosion; shear strength

Auteurs  Top 
  • Rousseau, J., meer
  • Pondicherry, K., meer
  • De Waele, W., meer

Abstract
    Bi-material steel-composite joints attract interest for marine applications. The marine environment imposes corrosion which is a prolonged process. This work presents a two-electrode electrochemical setup for accelerating free corrosion of the steel surfaces of bi-material joints. It is used to study the impact of accelerated corrosion on the mechanical performance of bi-material double lap specimens subjected to quasi-static tensile testing. Several test series have been conducted to evaluate the influence of overlap length and bond line thickness on shear strength and failure mode. Sixty specimens with a thick layer of methyl methacrylate adhesive have been fabricated and cured at room temperature for at least 24 h. Subsequently, 30 specimens were aged by subjecting them to electrochemical corrosion for 24 h. All specimens were tested for failure in quasi-static tensile loading while monitoring the strain fields in the joint area using digital image correlation. The measurements reveal a homogeneous shear strain field at the onset of loading, with a rapidly increasing shear strain concentration near the edges of the bond line preceding final failure. Both a decrease in the adhesive thickness and an increase in the overlap length increase the shear strength. Higher shear strength was observed for the electrochemically aged specimens than that of non-aged specimens. This is attributed to the faster residual curing of the adhesive during ageing because an increasing percentage of copper ions (released from the anode) accelerates the curing of the MMA adhesive. The electrochemically aged specimens showed mixed failure modes, i.e. cohesive failure and adhesive failure at the interface between steel and adhesive, and skin failure within the composite laminates.

Alle informatie in het Integrated Marine Information System (IMIS) valt onder het VLIZ Privacy beleid Top | Auteurs